IP PBX / VoIP Service Features
-5 Multiple Service Providers Lines
-Trunk Management: Support SIP Trunk / Gateway Trunk Management
-Support two-stage /one-stage call to Trunk by Trunk Group Configuration
-By adding external FXO analog gateway to use Terminal trunk Line
-By adding external GSM VoIP gateway to use GSM trunk line
-Built-in SIP Proxy Server Following RFC-3261
-Support password authentication using MD5 digest and RFC2833 for DTMF Relay
-20 extensions registration.
-4 inbound/outbound concurrent calls , 8 user calls simultaneously [only supporting trans-codec to G.729 ]
-8 concurrent calls, 16 user calls simultaneously [No Trans-Codec]
G.729, G.723, G.711 a-law, G.711μ-law, Ilbc, GSM ,
Configurable Call Routing (Dial Plan)
-Call Hunting – Round Robin
Extensions Status Monitor
Call hold / call waiting / 3 way conference
Forwarding - unconditional / unavailable / busy for Each Extension
2 Multiple Rooms for Meet-Me conference (Support 3 calls in each room)
Configurable IVR prompts (Optional)
Mail Box Access Control (PIN)
20 minutes recording time
HTTP method for Firmware Upgrade
Backup / Restore Configuration File
Record Greeting by IP Phone set
Auto-provision Server for IP Phone configuration (Optional)
Out-Of-Band DTMF (RFC2833)
Wireless LAN: (WiPBX Only)
Complies with 802.11g and 802.11b (2.4GHz) Standards
Support WEP, WPA data encryption to secure wireless connection
Both Support Wireless Access Point Mode and Wireless Client Mode
AC power : AC100V-240V, DC12V/1.5A,50/60 Hz (WiPBX only)
Temperature: 0°C ~ 40°C (Operation)
Humidity: up to 90% non-condensing
Emission: FCC Part 15 Class B, CE Mark
Dimension : 170 x 100 x 35 mm
The iPBX / WiPBX combines complete IP-PBX features with standards based
SIP for telephony solution that can stand alone or integrate with existing phone
systems. iPBX and WiPBX is an embedded system with built-in SIP Proxy
Server and NAT router for SOHO user not only provide network function but
also provide an IP PBX feature in office.
WiPBX not only provide IP PBX feature but also a Wireless AP for Wi-Fi Client
can access wireless network.