Copyright of GlobalNetworks Solutions, Inc.
2009 All Rights Reserved
The Soundwin SA200/SA110 Analogue Telephone Adaptor is equipped with
two telephone jacks to connect your existing phones or fax machines. Each
phone jack operates independently, with separate Internet Telephone Service
and phone numbers. With an appropriate Internet telephone service provider,
you'll get clear telephone reception and reliable fax connection, even while
using the Internet at the same time for normal data operations.
Telephony Specification:
Voice Codec: iLBC (internet Low Bitrate Codec),G.711(A-law /μ-law), G.729 AB, G.723 (6.3 Kbps / 5.3Kbps),
G.276 (16,24,32,40 Kbps)
FAX support : T.38 FAX Relay,G.711 Fax pass-through
SIP Session Timer Support
P-Asserted-Identity header Support (Optional)
Call Waiting
Call Hold/Resume
Call Transfer: Blind Transfer / Attended Transfer
Call Forward: On Busy Forward / No Condition forward / No Answer Forward
Call Screen: Incoming Call Screen (Reject or Forward Incoming Call) / Outgoing Call
Screen (Blocking Outgoing Call)
Multi-Line Appearance
DTMF Relay : In-band DTMF Relay / Out-of-band DTMF Relay (RFC2833)
3-Way Conference
Peer-to-Peer SIP Call by Dial Plan
IP Specifications:
SIP (RFC 3261) , SDP (RFC 2327), Symmetric RTP,
STUN (RFC3489), ENUM (RFC 2916), RTP Payload for DTMF Digits (RFC2833), Outbound Proxy Support
LAN :NAT, DHCP Server
WAN: PPPoE client, DHCP client, Fix IP Address
Network Address Translation: Providing build-in NAT router function.
Static Routing
Virtual Server
QoS: IP TOS (IP Precedence) / DiffServ
Data / Voice VLAN Priority
Call Features
Adjustable volume : - 9 db ~ 9 db
VAD (Voice Activity Detection)
Dynamic Jitter Buffer
CNG (Comfort Noise Generation)
Lost Packet Concealment
Caller ID Generation: DTMF CID / Bellcore CID / ETSI CID /NTT CID Generation
Peer to Peer Call by Dial Plan
Configuration & Management
Web-based Graphical User Interface
Remote management over the IP Network
Web-based firmware upgrade
Backup and Restore Configuration file
Auto Provision by TFTP/FTP/HTTP/HTTPS (Optional)
SNMP v1/v2
General Specification
AC power : AC100V-240V, DC12V/1.5A,50/60 Hz
Temperature: 0°C ~ 40°C (Operation)
Humidity: up to 90% non-condensing
Emission: FCC Part 15 Class B, CE Mark
RoHS Compliant
Dimension : 170 x 100 x 35 mm
Weight: 200g
